Go to Ultimatecarpage.com

  Ultimatecarpage.com  > Cars by brand  > Sweden  > Koenigsegg
One:1
Car search:
Quick Advanced 


  Koenigsegg One:1      

  Article Image gallery (84) Chassis (4) Specifications User Comments (1) Video (4)  
Click here to open the Koenigsegg One:1 gallery   
Country of origin:Sweden
Produced from:2014 - 2015
Numbers built:7 (Including the prototype)
Introduced at:2014 Geneva Motor Show
Author:Wouter Melissen
Last updated:December 24, 2015
Download: All images
Page 1 of 2 Next >>
Click here to download printer friendly versionLaunched at the 2014 Geneva Motor Show, the Koenigsegg One:1 is the first production road car to pack more than 1,000 Kw or 1 Mw, making what the Swedish manufacturer described as the first 'Megacar.' Koenigsegg also managed to keep the car's weight down to 1,360 kg, which meant that the car has a 1 hp/kg power to weight ratio, which explains the One:1 type name.

Based on the 'regular' production Agera, which itself was a gradual evolution of its predecessors, the One:1 is powered by a bespoke, all-aluminium, twin-turbo V8. Like the earlier Koenigsegg engines, the One:1's V8 could run on E85, regular pump gasoline and race fuel. In addition to pumping out around 1,360 hp, it was also good for a maximum torque of 1,371 Nm. All this power was transferred to the rear wheels through a seven-speed, dual-clutch gearbox.

Exotic materials were used throughout the One:1 to keep the weight down to the absolute minimum. It was built around carbon-fibre composite monocoque and the same material was used for the bodywork. The composite components were built in-house, in Koenigsegg's own factory. Many of the metal components were either crafted from aluminium alloys or titanium. The fully active suspension used double wishbones with carbon-fibre springs on all four corners.

The wheels were crafted in-house, completely from carbon-fibre to make sure they were both as light as possible to lower the un-sprung and were also capable of speeds of of well over 400 km/h. A proprietary technology was used to make the centre section of the wheel and the spokes hollow. Compared to similar aluminium wheels, the carbon-fibre ones are around 40% lighter. Perfectly moulded, the wheels only needed a polish once they were completed.

Page 1 of 2 Next >>

  Article Image gallery (84) Chassis (4) Specifications User Comments (1) Video (4)